Quick answer
Start with a 1:15 coffee-to-water ratio by weight, grind medium-coarse, steep for four minutes, and rinse the press with hot water immediately after each brew. Adjust the ratio and grind slightly to suit the coffee you are using.
Why the ratio matters more than the press
A French press gives you full control over extraction because the grounds stay in contact with the water for the whole brew. That makes the coffee-to-water ratio the single biggest lever you can pull. Too little coffee and the cup tastes thin and sour; too much and it turns bitter and muddy.
Weighing your coffee and water is more reliable than scooping, because bean density varies. A digital scale costs little and removes the guesswork.
Choosing a grind size for full immersion
Medium-coarse is the safe starting point: roughly the texture of sea salt. Finer grinds extract faster and can slip through the mesh, leaving sediment in the cup. Coarser grinds need a longer steep or a slightly higher ratio to avoid a weak brew.
If your cup tastes bitter and cloudy, grind coarser next time. If it tastes weak or sour, go slightly finer or extend the steep by 30 seconds.
Cleaning routine that protects flavour
Rinse the beaker and plunger with hot water as soon as you finish pouring. Coffee oils left on the mesh turn rancid and taint the next brew. Once a week, disassemble the plunger and wash the mesh and frame separately with a soft brush and mild dish soap.
Avoid abrasive scourers on the stainless steel and never put the beaker through a dishwasher unless the manufacturer states it is dishwasher-safe. The Graef French Press Coffee Maker 800ml is described as stainless steel, but the catalog does not list dishwasher suitability, so hand-washing is the safer default.
Step-by-step: brew and clean your Graef French Press
- Weigh coffee and water: For the 800ml press, use about 50g of medium-coarse coffee and 750ml of water just off the boil. That is roughly a 1:15 ratio and leaves headroom for the plunger. Common mistake: filling to the very brim, which causes overflow when you press. Stick to 750ml of water so the plunger has room to move.
- Add coffee, then water: Put the coffee in the beaker first, then pour all the water in one go and stir gently with a spoon. Make sure all grounds are saturated. Common mistake: pouring water first, which can leave dry clumps at the bottom. Stir once after pouring to break up any floating crust.
- Steep for four minutes: Place the lid on with the plunger raised and start a timer. At four minutes, press the plunger down slowly and steadily. Common mistake: plunging fast, which stirs up sediment and makes the cup cloudy. If the plunger resists, the grind is too fine; stop and pour through a sieve rather than forcing it.
- Pour immediately: Decant all the coffee into cups or a carafe as soon as you finish pressing. Leaving it on the grounds keeps extracting and turns the brew bitter. Common mistake: letting the press sit while you drink the first cup. A second carafe or a thermal jug keeps the rest hot without over-extracting.
- Rinse and disassemble: After pouring, rinse the beaker and plunger with hot water and wipe the mesh with a soft brush. Once a week, unscrew the plunger and wash the mesh separately with mild soap. Common mistake: leaving wet grounds in the press overnight, which sets oils onto the mesh. A five-second rinse now saves a scrubbing job later.
Product facts
- Graef French Press Coffee Maker 800ml - Black: The Graef French Press Coffee Maker has an 800ml capacity and stainless steel construction. The 800ml size brews several cups at once, so you can scale the ratio up without changing the method; stainless steel tolerates hot water and gentle washing.

Graef French Press Coffee Maker 800ml - Black


